Did you know that according to the National Institute on Aging, you must set your home’s heat temperature to at least 68–70°F during the winter?
Otherwise, your body will have a hard time staying warm and you could develop health problems. A pellet stove can help your family enjoy a comfortable home during the winter months.
Installing a pellet stove is not that difficult, but it will require some work on your part
Read on to learn more about pellet stove installation.
Set up a Hearth Pad
A hearth pad is floor protection that protects your floor from the high heat that a pellet stove can generate. You need to measure the area where you want to install the hearth pad.
Then, you need to cut the pad size. You also need to install the hearth pad on a level surface. Finally, you need to connect the pellet stove to the hearth pad.
Install a Fresh Air Intake
Consult your pellet stove’s manufacturer to determine the size and type of fresh air intake vent that is recommended for your model. When you install the fresh air intake, find a location that is away from any sources of pollution.
Mount the Fresh air intake properly so that furniture or other objects do not obstruct it in the room.
Connect the Stove to a Flue
The flue allows the smoke and fumes from the stove to escape through the chimney. However, if you are replacing an existing stove, you will need to make sure that the new flue is compatible with the old one.
Then, you will need to cut a hole in the wall that is the same size as the flue. Once you cut the hole, you will need to install the flashing around the flue. You must put the flue in place and secure it.
Put the Pellet Stove Insert
You can do this yourself if you’re feeling handy. When installing the insert, such as the flue pipe, you must install it properly and securely. Placed it on a level surface.
Make sure the location you choose is in a well-ventilated room. Also, be sure that you have the right size pellet stove insert for your home. Follow the instructions that come with your pellet stove insert.
Once you have installed your pellet stove insert, you will need to maintain it.
Place the Pellet Stove Pipe
This pipe will vent the stove and allow the fumes to escape. Measure the area where you’ll be installing the pipe and mark the interior ventilation hole size onto the wall. Using a power drill, create a ventilation pilot hole for the pipe.
Once the hole is ready, insert the pipe and secure it in place with screws. Apply sealant around the pipe to create a weather-tight seal. Once complete, your pellet stove will be ready to use.
Pellet Stove Installation Tips
In conclusion, this guide will teach you everything you need to know about pellet stove installation. From choosing the right model to installation tips like setting up a hearth pad to protect the floor and much more.
By following the instructions in this article on how to install a pellet stove, you can enjoy the benefits of cheaper, more efficient heating.
Check out the other blog posts on our site for advice on heating your home, and more!
